(123 products available)
Ready to Ship
Ready to Ship
Ready to Ship
The YJ58 motor can be used in an exhaust fan, and there are different types depending on how the winding is done on the stator. This includes the following.
Y-J58 Engine
The Y-J58 engine has simple wiring and requires an external device to switch the capacitor on for the fan to start rotating. The motor runs in a designated direction dependent on the wiring connections made at the time of installation. If the terminal connections are reversed, the motor will run in the opposite direction. However, the motor will not work if it tries to start in the wrong direction. It is commonly used in small exhaust fans and blowers.
Y-J58 Capacitor Run Motor
The YJ58 capacitor-run motor has a capacitor permanently connected between the stator windings. As a result, the motor can run in either direction depending on the connection. It sits in a shell that has a liquid cooling system. This helps cool the motor while it runs. The motors can be serviced while still mounted on other machines and without disassembling the exhaust fan itself.
Split Phase Motor
The YJ58 motor can also be a split-phase motor. It is similar to a capacitor motor but only has a phase-shifting winding. The winding has a higher inductance than the main winding at the starting end. A centrifugal switch then disconnects the starting end after the motor has reached approximately three-quarters of its rated speed. This allows the motor to run in either direction. However, it is not mounted in a shell. Instead, it has a member at the fan end that bridges the two end members. This allows for tight clearance between the fan and the motor so that it can be easily mounted on machines like exhaust fans.
An exhaust fan motor can lower the humidity in a room, remove stale air, and improve air quality. The key functions of a YJ58 motor are to power exhaust fans that ventilate spaces such as bathrooms, kitchens, and basements.
Air Movement
The primary function of an exhaust fan motor is to move air. It creates airflow that helps ventilate enclosed spaces. The motor powers the fan blades, which rotate to produce air circulation. This airflow causes air exchange, where stale or humid air is expelled and fresh air enters to replace it.
Cooling
The motor also cools the surrounding environment. An exhaust fan creates a wind-chill effect that brings down the temperature. This helps lower the heat buildup caused by cooking or excessive humidity accumulation. The cooling effect makes the interior more comfortable, especially during hot weather.
Air Circulation
Beyond moving air, the fan motor promotes proper air circulation. It prevents stratification by keeping air in motion. This mixed air maintains consistent temperature and humidity levels throughout the space. Good air circulation inhibits mold growth and prevents stale air pockets from forming.
The features of a yj58 motor include the following:
Yj58 exhaust fan motors find application in various industries and settings.
Home Use:
The fan motor can be used in the kitchen to eliminate odors and steam and in bathrooms to remove excess humidity and prevent mold growth.
Commercial Buildings:
Restaurants, malls, offices, and hotels use fan motors in ventilation systems to maintain good air quality and comfortable temperatures. Motors also power bathroom exhaust fans to keep restrooms dry and prevent odors from building up.
Industrial Facilities:
Factories and manufacturing plants use exhaust fans to remove harmful fumes, dust, and heat from work areas. Fan motors are also found in facility HVAC systems to control air circulation and cooling equipment to dissipate heat from machines and devices.
Schools & Hospitals:
Education institutions and medical centers use ventilation systems with fan motors to ensure a safe and comfortable environment for students, staff, patients, and visitors.
HVAC Systems:
Heating, ventilation, and air conditioning (HVAC) systems in homes and businesses employ fan motors to circulate air, control temperature, and provide proper ventilation.
Power Tools:
Many power tools such as drills, saws, and sanders use yj58 motors to provide the rotational motion needed for their operation.
Small Appliances:
From table fans to bladeless fans, the motors are used to power the cooling fans in computers, laptops, and other electronic devices to ensure proper ventilation and prevent overheating.
Blowers:
From leaf blowers to snow blowers, the motors provide the necessary speed and power for effective blowing actions.
If there is a specific application for the YJ58 motor, it is better to use a factory exhaust fan motor manufacturer. This will ensure that the motor is manufactured according to specific requirements and standards.
To choose a suitable motor, one must consider the following:
Horsepower or Motor Size
The horsepower of the exhaust fan motor must be estimated, depending on the total pressure at which the fan has to operate, the required air quantity, and the size of the motor. The efficiency of the fan and the design will also influence the size of the motor required.
Speed
Depending on the application, the manufacturer must specify the speed at which the fan must operate. The speed may directly affect the performance of the fan and its size; hence, it must be considered carefully. Usually, fans operate at the following speeds, which are stated in RPM: Low-speed fans operate between 300 to 900 RPM, medium-speed fans operate between 900 to 2100 RPM, and high-speed fans operate over 2100 RPM.
Motor Type
One must choose between an AC and a DC motor. The type of power supply required must also be considered. An AC motor can run on single-phase or three-phase electricity, and a DC motor requires only a direct current supply.
Voltage and Amperage
It is essential to check the voltage and current ratings on the motor nameplate. These ratings must be compatible with the supply voltage and current at the installation site. If the ratings differ, then the motor can be damaged.
Mounting Arrangements
The motors can be mounted in different arrangements, like horizontal or vertical. The mounting arrangement must be chosen based on the installation requirements. The correct mounting arrangement must be chosen based on the fan's installation position; otherwise, the fans can be damaged.
Enclosure Type
The enclosure type must be chosen according to the type of environment where the fan will be installed. The type is classified, and one must choose between a general-purpose fan and an explosion-proof fan, an IP55 and an IP65, among others.
Energy Efficiency
When motors are manufactured, they are made under various energy efficiency standards. Those that are energy efficient consume less power and help reduce operating costs. A plain fan motor is ideal because it has higher energy efficiency than a fan with a speed control facility.
Q1: What is the YJ58 motor's RPM range, and why is it important?
A1: The YJ58 motor runs at 750 - 3000 revolutions per minute (RPM). RPM refers to the number of times the fan blade turns in a minute. This motor has different RPM levels to cater to diverse preference and application needs. Facilities can select a fan exhaust motor with suitable RPM depending on the desired ventilation level.
Q2: How many poles do YJ58 motors have, and what is their significance?
A2: YJ58 motors have 2 or 4 poles. The number of poles affects the fan motor's speed and performance. Motors with 2 poles operate at higher speeds, while those with 4 poles run at lower speeds. The choice between a 2-pole and 4-pole motor depends on the application requirements.
Q3: What certificates do YJ58 motors have?
A3: The motor has several certificates, including the ISO9001 certificate for quality management systems, CE for adherence to European Union regulations, and RoHS for restrictions on hazardous substances. The certification proves the manufacturer's commitment to producing safe, environmentally friendly and quality products.
Q4: Are YJ58 motors MS or aluminum?
A4: The YJ58 motor can have an aluminum or metal base. The metal base has better corrosion resistance. It also endures harsh environments, offering longer service life. However, the motor with an aluminum base is lighter, so it is easier to install and handle.
Q5: Does the motor support OEM?
A5: Yes, the YJ58 motor supports OEM manufacturing. OEM orders allow businesses to request modifications per specific requirements. This may include changes to design, packaging, or adding a brand logo. OEM production enables businesses to create customized products suitable for their market.
浙公网安备 33010002000092号
浙B2-20120091-4